News and Trends
RK3588 Custom COM Express Module, WF-C3588-P8, AndroidSBC, Thessaloniki
TL;DR: RK3588 Custom COM Express Module
SHENZHEN, China, September 12, 2026 - The WF-C3588-P8 board line at Wanlin Longgang closed lot 167 this week. 37,625 units are now booked for Thessaloniki, Greece, shipped FOB with the full certification file attached.
AndroidSBC field deployment report from active Rockchip RK3588 custom board projects serving Thessaloniki, Greece. The line spans custom Android motherboards at the entry variant through core-board-plus-carrier work at the SOM end, all on the same Rockchip RK3588 silicon with 6 TOPS NPU, 8K H.265 decode and up to 32GB of LPDDR5. AndroidSBC ships the full range from the Wanlin Longgang plant, and Thessaloniki buyers can mix custom variants inside a single framework agreement rather than opening a new supplier file for each product line.

About AndroidSBC and the Rockchip RK3588 Board Family
AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building custom OEM and ODM boards on Rockchip silicon. The line this release covers is the WF-C3588: nine custom motherboard variants built on the same Rockchip RK3588 octa-core 8nm platform with 6 TOPS NPU and 8K H.265 video, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant in Shenzhen builds the WF-C3588 for Greece OEM, integrator and distributor programmes. For a Thessaloniki buyer the practical value of the line is that one silicon and one supplier file cover nine custom categories.
WF-C3588-P8 Technical Specifications
| Parameter | AndroidSBC WF-C3588-P8 (Custom ARM PC, Mini PC and NAS Board) | Industry Average |
|---|---|---|
| Processor | Rockchip RK3588 octa-core 4x Cortex-A76 2.4GHz + 4x Cortex-A55 1.8GHz (8nm) + 6 TOPS NPU | Quad-core Cortex-A55 without NPU |
| Graphics | Mali-G610 MP4 with OpenGL ES 3.2, Vulkan 1.2 and 8K output | Mali-G52 class, 4K ceiling |
| Memory | 4GB to 32GB LPDDR4X/LPDDR5 per product line | Fixed 4GB |
| Storage | M.2 NVMe PCIe 3.0 x4 + dual SATA 3.0 bays + eMMC | Single eMMC |
| Display | HDMI 2.1, DP 1.4 and multi-screen for trading and desktop layouts | Single output |
| Connectivity | Dual Gigabit Ethernet, WiFi 6, Bluetooth 5.3, optional 4G/5G | Single WiFi 4 |
| On-device AI | 6 TOPS NPU for local search, transcription and video features | Cloud AI only |
| OS support | Android, Ubuntu, Debian and Yocto desktop images, BSP per product | Single vendor image |
| Acoustics | Fanless or low-noise ducted chassis designs per project | High-noise fan |
| Customization | Chassis, I/O, memory and branding shaped per brand line | No engineering path |
| Certification path | CE, FCC, UKCA, RoHS, EMC, GMS optional | No compliance file |
| Supply commitment | Seven-year supply window for long product cycles | No lifecycle promise |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-P8 (Custom ARM PC, Mini PC and NAS Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Greece importers sourcing the WF-Series, the 16GB + 256GB (WF-C3588-P8-C) variant is the typical configuration for the custom ARM PC and NAS programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.
Challenges in Sourcing Custom ARM PC, Mini PC and NAS Board for Greece Buyers
The custom arm pc, mini pc and nas board sourcing question that Thessaloniki distributors keep coming back to is continuity across quarters. The Rockchip RK3588 requires a dedicated wafer slot, and a 37,625-unit order placed against broker inventory often turns into a two-month slip with no warning. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.
The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the custom board build, the certified image burn, the burn-in record and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine variants in the WF-C3588 cover ARM PCs, mini PCs, thin clients, NAS enclosures, media stations, home theatre systems, desktop workstations, and personal cloud devices and each one carries three memory configurations, which keeps Thessaloniki and Greece buyers on standard custom SKUs for most requirements.
Buyers in Greece tend to ask about the local mark before they ask about price. In Greece the market is served by a small group of Athens-based distributors who also cover Cyprus, so listings concentrate quickly. AndroidSBC handles that by preparing the destination-market file covering CE marking with EETT radio interface notification administered by EETT alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Piraeus on the Piraeus to Shanghai lane.
Competitive Comparison: WF-C3588-P8 vs Competing RK3588 Boards
Three families of board chase the same custom arm pc, mini pc and nas board socket. The first is catalogue hardware with fixed memory and fixed I/O, the second is re-badged stock where nobody owns the schematic, and the third is a real custom platform built by the factory that runs the SMT line. The WF-C3588-P8 belongs to the third family and separates itself on Rockchip RK3588, on customization depth from schematic to firmware, and on a certified image burned per lot.
- vs x86 entry desktops: the WF-C3588-P8 runs office and media workloads at a fraction of the power draw, which is the argument for fleet and education deployments.
- vs consumer ARM sticks: dual SATA bays, NVMe and dual GbE make it a real NAS and desktop board rather than a streaming stick.
- vs single-line mini PC brands: the customization path lets a brand keep one platform across a product family while varying memory, storage and chassis.
- vs assembled import boxes: the seven-year supply commitment and the per-lot file give a PC brand a lifecycle story instead of a spot buy.
Global Custom ARM PC and NAS Board Market Trends
The Custom ARM PC and NAS Board curve is what Greece importers read before committing to a custom arm pc, mini pc and nas board programme. The number they quote is the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), which serves as the closest public proxy for the silicon demand behind custom RK3588 boards. For Thessaloniki that resolves into three demand patterns across the WF-C3588 order book:
- Fleet desktop programme: an enterprise replaces ageing towers with fanless ARM PCs at a third of the power draw.
- Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-P8 board carries that headroom without a board change.
- Home NAS enclosure: a storage brand ships a dual-bay NAS with the NPU running photo search locally.
What the Custom ARM PC and NAS Board data does not show is the operational cost of a supply break, which is why Thessaloniki buyers increasingly weight supplier continuity above a marginal price difference.
Across those three segments, Thessaloniki procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a custom Android, industrial, signage or robotics programme needs a twelve-month shipping window.
Partner Success Story: Northlight Robotics in Thessaloniki, Greece
Northlight Robotics, an AMR and AGV maker serving the Greece market, deployed 7,800 custom WF-C3588-R5 robotics controller boards for a warehouse fleet rollout. The rollout covered the fleet desktop programme, home nas enclosure, and personal cloud device workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.
- Deployed: 7,800 custom WF-C3588-R5 robotics controller boards for a warehouse fleet rollout
- Region: Thessaloniki, Greece
- Models used: WF-C3588-P8 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
- Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
- Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Piraeus via the Piraeus to Shanghai lane
"We handed over our sensor list and got back a carrier with the LiDAR serial bank and the motor CAN routed exactly to spec. SLAM runs on the NPU on the same board that drives the wheels, which removed an entire controller from the chassis."
- Park Ji-hoon, Technical Director
Field Report: a school district rollout in Thessaloniki, where 37,625 units of the WF-C3588-P8 board are being installed in classroom device carts
Reporter Jiang Bo, on the ground in Thessaloniki, Greece. The district took delivery of the order and dispatched installation crews to eight sites. Each WF-C3588-P8 unit was sealed into a ruggedised chassis running a managed Android image with the education services stack pre-provisioned for the district tenant, and the fleet enrolled against the MDM the same week.
Radiated emissions on the sampled units came in below the internal limit with margin, which the compliance engineer noted as consistent with the last four lots.
The inspection confirmed three things on the spot: the WF-C3588-P8 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with EETT radio interface notification administered by EETT, cleared for entry at Port of Piraeus on the Piraeus to Shanghai lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Greece importers can hand straight to their customs broker.
Filed by Jiang Bo, AndroidSBC field reporter, Wanlin Manufacturing Group export base.
WF-C3588-P8 Application Scenarios
The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-P8 (Custom ARM PC, Mini PC and NAS Board) as the lead SKU for Thessaloniki and Greece programmes:
- Fleet desktop programme: an enterprise replaces ageing towers with fanless ARM PCs at a third of the power draw.
- Thin client estate: a bank standardises on one board class across branches with a locked Ubuntu image.
- Home NAS enclosure: a storage brand ships a dual-bay NAS with the NPU running photo search locally.
- Media station build: a CE brand pairs the board with an 8K panel and Widevine-level DRM for a premium player.
- Education desktop: a district deploys locked-down student desktops with MDM enrolment out of the box.
- Personal cloud device: a privacy-focused brand runs sync and backup locally with no cloud dependency.
- Trading desktop: a finance team runs four screens from one board with the desktop image tuned for stability.
- Developer workstation: an engineering shop issues Ubuntu workstations with the NPU for local model testing.
Partnership Models for Thessaloniki Buyers
For Thessaloniki distributors and brand owners, AndroidSBC opens the custom arm pc, mini pc and nas board line under three contract shapes:
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
- ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
- Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.
Whichever structure a Greece partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-C3588-P8 is the 16GB + 256GB (WF-C3588-P8-C) configuration at MOQ 5,000 units per shipment, 1-3 days to sample and 15-30 days to mass production.
Frequently Asked Questions
What exactly can be customised on an RK3588 motherboard from AndroidSBC?
Answer: The customization scope runs across five layers: hardware (PCB, PCBA, I/O, memory, storage), thermal (fanless passive, vented, wide-temperature, conformal coating), software (custom ROM, custom Linux, pre-installed apps, OTA), branding (logo, packaging, boot animation, SKU labels), and compliance (the certification file assembled for the exact configuration you ship). Most Greece partners change two or three layers on a standard variant rather than commissioning a full custom run.
Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?
Answer: Custom ROM, custom BSP and custom SDK work are all part of the ODM tier. AndroidSBC builds the Android image (12, 13, 14 or 15, GMS or AOSP), ports the Linux BSP to your carrier revision, and releases the SDK modules your team needs under NDA. The engineering desk carries the port itself, so a Greece integrator is not left debugging an unmodified vendor BSP against a carrier it was never designed for.
Can the 6 TOPS NPU on a custom board run our own AI models?
Answer: Yes. The RK3588 NPU runs INT4, INT8, INT16, FP16, BF16 and TF32, and AndroidSBC supports model deployment through the Rockchip RKNN-Toolkit2, with quantization from PyTorch, ONNX, TensorFlow, Caffe and MXNet. As part of the ODM tier, the engineering desk walks your model from framework to RKNN format and validates it on the actual board configuration you are shipping, not a reference unit. Model files are versioned so a retrained model can be pushed to field units through OTA without a board swap.
What are the MOQ and lead times for a custom RK3588 motherboard?
Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a Greece project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.
What certifications does a custom board need for Greece, and who handles them?
Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.
How long will AndroidSBC keep supplying a custom board?
Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux firmware tracks and OTA infrastructure for pushing firmware and RKNN model updates to deployed units. Long-lifecycle programmes in industrial, signage and robotics usually ask for the term in writing, and it is written.
Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?
Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration follow FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.
How does AndroidSBC handle RMA or DOA replacements on custom boards?
Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-C3588-P8 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in and configuration record, partners typically receive a root-cause note with the replacement rather than a silent credit.
Contact AndroidSBC: Start Your WF-C3588-P8 Sourcing Conversation
AndroidSBC is the export channel for the Wanlin WF-C3588 custom board line. Buyers in Thessaloniki and Greece looking to source the WF-C3588-P8 straight from the source factory can use any of the following:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Destination market file: CE marking with EETT radio interface notification for Greece, administered by EETT, entering at Port of Piraeus on the Piraeus to Shanghai lane
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
The export desk asks for three things on a first enquiry: annual volume, customization scope and Incoterm. Provide those and a per-lot quote plus the WF-C3588 MOQ matrix comes back within two business days.