TL;DR: Financial Payment Terminal Board
AndroidSBC manufacturer capacity statement from the smart payment terminal production base serving international market, Greece. The WF-SPT-04 smart payment terminal Android motherboard covers the face recognition payment terminal build and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 3.5-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Greece importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
The WF-SPT line exists because payment hardware buyers in Greece rarely want a new board design - they want the same board with a different modem, a different panel and a different certification file. AndroidSBC holds those variables inside one family, and the international market buyer picks the configuration rather than commissioning a new PCB. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a international market quality team that has signed off one WF-SPT board can read the next one without a new learning curve.
WF-SPT-04 Technical Specifications
| Parameter | AndroidSBC WF-SPT-04 (face recognition payment terminal build) | Industry Average |
|---|---|---|
| Processor | RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 8nm | Older 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-400 or basic 2D GPU |
| Memory | 4GB LPDDR4X | DDR3 512MB or 1GB on competing boards |
| Storage | 64GB eMMC plus TF card up to 256GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 8-inch 1280x800 eDP main panel plus 3.5-inch customer screen with 10-point capacitive touch with glove and wet-finger support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | 3D structured light face module plus NFC contactless and IC card | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 150mm per second output | No printer control header on competing boards |
| Wireless and positioning | 4G LTE Cat 6 modem plus dual-band WiFi 6 and Bluetooth 5.2 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 1 USB host, 1 RS232, 1 MIPI CSI, 6 GPIO, 1 SIM slot, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 14 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, dual-cell RTC and watchdog, -10C to 55C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-04 (face recognition payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Greece importers sourcing the WF-SPT family, the WF-SPT-04-A variant is the typical configuration for the chain pharmacy and supermarket face payment lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Greece Buyers
The first problem international market buyers hit is the difference between a sample that works and a configuration that repeats. A board can pass a bench test and still fail in volume if the printer driver, the scan engine mapping and the modem band list were never documented as part of the delivery.
Key handling is the fifth problem. Payment hardware shipped into Greece has to show how keys are injected, how the secure element is provisioned and how a tamper event is logged, and that documentation belongs in the international market delivery file. Every Greece programme that reaches volume at AndroidSBC goes through the 8th gate: 180100 boards qualified on the bench, the compliance file matched to the configuration, and only then a production slot on the Piraeus - Shanghai lane for international market.
Competitive Comparison: WF-SPT-04 vs Competing Smart Payment Terminal Motherboards
A Greece integrator comparing two boards should compare the delivery file, not the datasheet. One side ships a test report and a compliance set; the other ships a board and a promise.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Greece integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
For international market integrators the market signal is simple - contactless and QR now carry the majority of face-to-face volume in Greece, so the board is specified around the reader and the camera first and the keypad second.
- Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
The Greece demand curve rewards the vendor who can hold a configuration. AndroidSBC treats a frozen bill of materials as the product feature that matters most to a international market integrator with an estate to maintain.
WF-SPT-04 Application Scenarios
The WF-SPT-04 face recognition payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-04-A configuration is the typical build for the chain pharmacy and supermarket face payment lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-04 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
The international market decision is usually commercial rather than technical - whether the partner wants inventory risk, integration depth or brand ownership in Greece.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
The Greece partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.
Frequently Asked Questions
Does the smart payment terminal board family support a face recognition payment terminal build?
Answer: Yes. The face recognition payment terminal build is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in international market.
Which configurations are available in the WF-SPT family for Greece buyers?
Answer: AndroidSBC ships twelve configurations including the RK3576 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in Greece.
What payment scheme certification support does AndroidSBC provide for Greece?
Answer: AndroidSBC prepares CE marking with EETT radio interface notification documentation and EETT conformity files alongside the production order, so the international market acquiring partner receives a file that names the parts on the pallet.
What is the minimum order quantity and the sample lead time for Greece?
Answer: MOQ depends on the track: stock configurations ship from one unit, private-label builds start at 500 boards, and both are quoted against the same frozen bill of materials for Greece.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the international market estate.
How are firmware updates delivered to a Greece device estate after deployment?
Answer: Updates are signed, staged and reversible. The international market integrator chooses the group size, and a failed update returns the terminal to the previous image without a site visit.
What shipping terms does AndroidSBC support for Greece orders?
Answer: The Greece lane runs weekly into Port of Piraeus, and the international market buyer receives the tracking reference, the packing list and the compliance file at the same time.
Contact AndroidSBC: Start Your WF-SPT-04 Sourcing Conversation
AndroidSBC is taking new Greece partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For international market and Greece buyers the offer is a source-factory relationship: twelve configurations, one peripheral contract, a frozen bill of materials and a compliance file that ships with the pallet rather than after it.
