TL;DR: Main Screen + Customer Screen Payment Terminal for Convenience Stores
AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving Thessaloniki, Greece. The WF-SPT-06 smart payment terminal Android motherboard covers the kiosk payment terminal build with large touch panel and eleven sister configurations in the WF-SPT series, spanning the RK3399 dual-core ARM Cortex-A72 2.0GHz plus quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-T860 MP4 GPU, 8-inch 1920x1080 eDP capacitive touch panel, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Thessaloniki and Greece importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
The WF-SPT line exists because payment hardware buyers in Greece rarely want a new board design - they want the same board with a different modem, a different panel and a different certification file. AndroidSBC holds those variables inside one family, and the Thessaloniki buyer picks the configuration rather than commissioning a new PCB. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a Thessaloniki quality team that has signed off one WF-SPT board can read the next one without a new learning curve.
WF-SPT-06 Technical Specifications
| Parameter | AndroidSBC WF-SPT-06 (kiosk payment terminal build with large touch panel) | Industry Average |
|---|---|---|
| Processor | RK3399 dual-core ARM Cortex-A72 2.0GHz plus quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-T860 MP4 | Older Mali-400 or basic 2D GPU |
| Memory | 4GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 32GB eMMC plus TF card up to 128GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 8-inch 1920x1080 eDP capacitive touch panel with 10-point capacitive touch on the main panel | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card and QR with PIN pad header | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 150mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 802.11 a/b/g/n/ac with Bluetooth 5.0 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 2 USB host, 1 RS232, 1 HDMI out, 6 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 12 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, watchdog and scheduled power on, -10C to 50C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-06 (kiosk payment terminal build with large touch panel) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Greece importers sourcing the WF-SPT family, the WF-SPT-06-A variant is the typical configuration for the quick service restaurant self-ordering kiosks use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Greece Buyers
Sourcing a smart payment terminal board for Greece is rarely a question of finding a cheap board. It is a question of finding a board that will still be buildable in three years, with the same printer pinout, the same reader antenna and the same Android baseline, because a payment estate is not refreshed on a whim.
Key handling is the fifth problem. Payment hardware shipped into Greece has to show how keys are injected, how the secure element is provisioned and how a tamper event is logged, and that documentation belongs in the Thessaloniki delivery file. Every Greece programme that reaches volume at AndroidSBC goes through the 8th gate: 75200 boards qualified on the bench, the compliance file matched to the configuration, and only then a production slot on the Piraeus - Shanghai lane for Thessaloniki.
Competitive Comparison: WF-SPT-06 vs Competing Smart Payment Terminal Motherboards
AndroidSBC publishes this comparison because Thessaloniki integrators ask for it: what changes when a payment terminal board is built by a source factory that holds its bill of materials, against one that is re-spun on every order.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a Thessaloniki buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Greece integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Thessaloniki is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
What Greece buyers are actually procuring is not a terminal, it is a platform they can repeat across formats. That is why the kiosk payment terminal build with large touch panel is specified with a peripheral contract rather than a feature list.
- Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
What the Thessaloniki buyer should take from the numbers is a procurement rule: specify the peripheral contract and the firmware window first, then negotiate the unit price, because the integration labour is the larger line item in Greece.
WF-SPT-06 Application Scenarios
The WF-SPT-06 kiosk payment terminal build with large touch panel sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-06-A configuration is the typical build for the quick service restaurant self-ordering kiosks use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-06 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for Thessaloniki Buyers
AndroidSBC publishes these three tracks because Greece partners ask the same question in every first call: how much of the work do we take, and how much do you take.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
The Greece partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.
Frequently Asked Questions
Does the smart payment terminal board family support a kiosk payment terminal build with large touch panel?
Answer: Yes. The kiosk payment terminal build with large touch panel is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in Thessaloniki.
Which configurations are available in the WF-SPT family for Greece buyers?
Answer: AndroidSBC ships twelve configurations including the RK3399 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in Greece.
What payment scheme certification support does AndroidSBC provide for Greece?
Answer: AndroidSBC prepares CE marking with EETT radio interface notification documentation and EETT conformity files alongside the production order, so the Thessaloniki acquiring partner receives a file that names the parts on the pallet.
What is the minimum order quantity and the sample lead time for Greece?
Answer: MOQ depends on the track: stock configurations ship from one unit, private-label builds start at 500 boards, and both are quoted against the same frozen bill of materials for Greece.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the Thessaloniki estate.
How are firmware updates delivered to a Greece device estate after deployment?
Answer: AndroidSBC manages the Greece estate through staged OTA: signed images, grouped rollout, automatic rollback on failure and a maintenance window agreed with the Thessaloniki operations team.
What shipping terms does AndroidSBC support for Greece orders?
Answer: The Greece lane runs weekly into Port of Piraeus, and the Thessaloniki buyer receives the tracking reference, the packing list and the compliance file at the same time.
Contact AndroidSBC: Start Your WF-SPT-06 Sourcing Conversation
AndroidSBC is taking new Greece partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Wanlin Manufacturing Group builds the WF-SPT family in Shenzhen and exports it through AndroidSBC to Greece and more than 60 markets. Thessaloniki enquiries for samples, price lists and certification files are answered within one working day.
