TL;DR: RK3568 Android POS Board for Restaurant Till
AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Thessaloniki, Greece. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Thessaloniki and Greece importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
The WF-P family from AndroidSBC, a Wanlin Manufacturing Group export brand, covers eight silicon tiers from the Rockchip RK3576 octa-core platform down to the Allwinner A133 entry tier. For Thessaloniki buyers the practical consequence is simple: one driver contract, one mounting pattern and one firmware baseline across every lane of a rollout, whether the lane is a supermarket checkout, a restaurant counter or an unattended forecourt cabinet. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Thessaloniki integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P3602 Technical Specifications
| Parameter | AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | MIPI DSI output at 720p | Single HDMI 1080p only on competing boards |
| Touch support | 5-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | -10C to 55C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Greece importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Greece Buyers
Dual-screen POS is where most competing boards fail quietly. They list two display interfaces, but the second lane is a mirror rather than an independent framebuffer, so the customer display cannot carry a separate promotion loop.
The fiscal layer is handled in firmware. Receipt templates, log retention and the fiscal printer handshake are configured before shipment, and the Port of Piraeus lane is booked against a production slot so the Thessaloniki pilot batch lands inside the store opening window. AndroidSBC logged the 8th shipment to Thessaloniki on September 23, 2026 - 21600 boards on the Piraeus - Shanghai lane, each serialised against its burn-in record and each carrying the same firmware baseline.
Competitive Comparison: WF-P3602 vs Competing POS Android Boards
Competing boards reaching Thessaloniki usually win on unit price and lose on everything that happens after the first container. The four points below are where that shows up.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Two forces drive the Greece POS hardware cycle. The first is the shift to contactless and wallet payments, which pushes the NFC reader and the payment kernel onto the board itself. The second is the regulatory floor - EMV, PCI DSS and national fiscal rules - which forces an upgrade on a timetable the merchant does not control.
- Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P1330 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P6180 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
For Thessaloniki buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the counter.
Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)
A Nordweg Kasse Systemer programme in the Nordic convenience retail segment illustrates how the WF-P family from AndroidSBC supports Thessaloniki integrators on the ground. Nordweg Kasse Systemer deployed 21600 WF-P boards across 140 convenience counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus EETT conformity, all bundled into the Shenzhen source-factory shipment.
Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail highlighted: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 21600 boards went into the Thessaloniki estate without a driver change.
Field Report: tableside ordering handheld rollout at a casual dining group
PINGHU, September 23, 2026 - Geng Yan, AndroidSBC field desk. The WF-P3602 board designated for the mobile handheld POS with 4G and barcode engine application was pulled from the same production lot as the pilot batch, so the Greece team received an identical configuration. The WF-P3602 POS Android motherboard order for Thessaloniki, Greece cleared the burn-in station on schedule and is en route via the Piraeus - Shanghai lane.
The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Greece integrators, the EETT conformity plus CE marking with EETT radio interface notification paperwork is bundled.
Filed by Geng Yan, AndroidSBC field desk, PINGHU. Greece integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3602 Application Scenarios
The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Thessaloniki.
- Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Thessaloniki: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Thessaloniki Buyers
AndroidSBC runs three commercial tracks on the WF-P family, and Thessaloniki partners usually start on one and move to another as volume builds.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
The Thessaloniki partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?
Answer: Supported. mobile handheld POS with 4G and barcode engine is part of the standard WF-P configuration set, and the board ships to Thessaloniki with the drivers and the firmware baseline already matched.
Which silicon tiers are available in the WF-P family for Greece buyers?
Answer: The family covers eight platforms from the RK3576 octa-core tier down to the A133 entry tier. The RK3568 board in this configuration is supported for seven years from release.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: One board handles all four. The driver SDK ships in the carton covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC, RFID, magnetic stripe, IC card, PIN pad and fingerprint reader.
What is the minimum order quantity and the sample lead time for Greece?
Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Thessaloniki partner reference image.
How are firmware updates delivered to a Greece estate after deployment?
Answer: Staged OTA with rollback ships with the board. The Greece partner controls the wave size and the timing, and the watchdog recovers a lane that fails mid-update.
What shipping terms does AndroidSBC support for Greece orders?
Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Thessaloniki partner chooses the Incoterm that matches its broker arrangement.
What happens if a board fails in the field in Greece?
Answer: Every unit is serialised against its test record. A Greece field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen BOM.
Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Thessaloniki integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Thessaloniki and Greece buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.
