TL;DR: POS Motherboard 4K@60Hz Output for Restaurant Till
AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Thessaloniki, Greece. The WF-P7602 POS Android motherboard spans the triple-screen POS terminal with independent content and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, HDMI plus LVDS plus eDP triple independent output, and Android 14 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Thessaloniki and Greece importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-model WF-P POS Android motherboard family at the Longgang source factory in Shenzhen. The line spans entry single-screen counters through AI face payment terminals and industrial outdoor payment cabinets, so a Thessaloniki integrator can qualify one board family and then move between tiers without re-writing the peripheral layer or re-cutting the enclosure. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Thessaloniki integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P7602 Technical Specifications
| Parameter | AndroidSBC WF-P7602 (triple-screen POS terminal with independent content) | Industry Average |
|---|---|---|
| Processor | RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 16GB LPDDR5 | DDR3 1GB / 2GB on competing boards |
| Storage | 128GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI plus LVDS plus eDP triple independent output | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 14 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7602 (triple-screen POS terminal with independent content) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Greece importers sourcing the WF-P family, the WF-P7602-A variant is the typical configuration for the hypermarket checkout plus promotion wall use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Greece Buyers
The thermal problem is underrated. A sealed all-in-one terminal with no fan has to hold a 7x24 counter duty cycle in a Greece summer, and boards that pass a bench test at 25C start throttling behind a shop window.
The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Thessaloniki is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. For the Thessaloniki programme the milestone landed on September 23, 2026: 46400 boards shipped on the Piraeus - Shanghai lane, seven-year firmware window committed on the whole WF-P family.
Competitive Comparison: WF-P7602 vs Competing POS Android Boards
Four differences decide whether a Greece POS rollout survives its second year, and they are all visible before the first lane goes live.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
The Greece picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Thessaloniki integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.
- Entry counter tier: WF-P7602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P6180 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P5270 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The Greece market will keep absorbing Android POS boards for the rest of the decade. The question for Thessaloniki buyers is whether the board underneath the terminal is built to be re-ordered.
Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)
A recent Nordweg Kasse Systemer deployment in the Nordic convenience retail segment shows how the WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Thessaloniki integrators. Nordweg Kasse Systemer deployed 46400 WF-P boards across 140 convenience counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus EETT conformity, all bundled into the Shenzhen source-factory shipment.
According to Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 46400 boards went into the Thessaloniki estate without a driver change.
Field Report: triple-screen checkout and promotion wall at a hypermarket
YANTIAN, September 23, 2026 - Chu Lin, AndroidSBC field desk. Each WF-P7602 board in the Greece lot carries a serial number logged against its test record, and the peripheral validation report references those serials. The WF-P7602 POS Android motherboard order for Thessaloniki, Greece cleared the burn-in station on schedule and is en route via the Piraeus - Shanghai lane.
The WF-P7602 triple-screen POS terminal with independent content production lot includes the WF-P7602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Greece integrators, the EETT conformity plus CE marking with EETT radio interface notification paperwork is bundled.
Filed by Chu Lin, AndroidSBC field desk, YANTIAN. Greece integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P7602 Application Scenarios
The WF-P7602 triple-screen POS terminal with independent content sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7602-A configuration is the typical build for the hypermarket checkout plus promotion wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P7602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Thessaloniki.
- Convenience and small format stores: the WF-P3601 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3602 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P3566 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3288 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Thessaloniki: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Thessaloniki Buyers
For Greece importers the track choice changes the paperwork, not the board. The three options below are the standard ones.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
AndroidSBC is recruiting local partners in Greece on all three tracks, and the qualification evidence needed to start is the same in each case.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a triple-screen POS terminal with independent content?
Answer: Yes. AndroidSBC validates triple-screen POS terminal with independent content on the bench with the actual peripherals the Thessaloniki partner intends to use, and the result is written into the shipment file.
Which silicon tiers are available in the WF-P family for Greece buyers?
Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Thessaloniki partner always knows which tier is shipping.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Thessaloniki partner printer and scanner models, and the validated configuration is locked as the production reference.
What is the minimum order quantity and the sample lead time for Greece?
Answer: For Thessaloniki buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.
How are firmware updates delivered to a Greece estate after deployment?
Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.
What shipping terms does AndroidSBC support for Greece orders?
Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Thessaloniki partner books the lane that suits the import process.
What happens if a board fails in the field in Greece?
Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Thessaloniki programme so the lane is not down for a full lead time.
Contact AndroidSBC: Start Your WF-P7602 Sourcing Conversation
Thessaloniki integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Greece buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.
